đŸĒĩ Free Plaster Calculator | Estimate Cement & Sand

Calculate cement and sand required for plastering walls, ceilings and floors.

What is a Plaster Calculator?

BuildCostMate's free plaster calculator helps you estimate the quantity of cement and sand required for plastering walls, ceilings, and floors. It supports multiple surfaces, door/window deductions, and custom mix ratios. Whether you're a contractor, builder, or DIY enthusiast, our tool makes plaster material estimation quick and accurate.

How to Use the Plaster Calculator

  1. Select your preferred unit (Feet or Meter).
  2. Click Add Surface to add walls, ceilings, or floors.
  3. Enter the dimensions of each surface.
  4. Add door/window deductions if needed.
  5. Choose a mix ratio or enter a custom ratio.
  6. Click Calculate Materials.
  7. View the estimated cement bags and sand required.

Why Use the BuildCostMate Plaster Calculator?

Frequently Asked Questions About Plastering

What mix ratio should I use for plaster?

1:4 (cement:sand) is standard for most plastering work. Use 1:3 for stronger plaster in high-moisture areas and 1:5 for weaker plaster in low-moisture areas.

How thick is the plaster in this calculator?

This calculator uses a standard plaster thickness of 0.5 inches (12mm) for all surfaces.

Is the BuildCostMate Plaster Calculator free?

Yes! BuildCostMate Plaster Calculator is completely free to use with no registration required.

Can I use custom mix ratios?

Yes. You can select Custom Ratio and enter your own cement to sand ratio.

Does the calculator support feet and meters?

Yes. You can switch between Feet and Meter units easily.

Related Calculators

How the plaster calculator works

Enter the wall length and height, deduct openings and choose the mix ratio (1:3, 1:4, 1:5 or your own). The calculator multiplies the area by a standard plaster thickness of 12 mm (ÂŊ inch) to get the wet volume, applies a dry-volume factor of 1.33 and splits the result into cement and sand, converting cement into 50 kg bags. A wastage percentage covers droppings and uneven walls.

Quick reference

For 100 square feet at 12 mm with a 1:4 mix the calculator gives roughly 0.86 of a bag of cement and 4.2 cubic feet of sand (the guide's hand calculation uses a factor of 1.27 and gives 0.82 bag and 4.0 cubic feet; both factors are in common use). Internal walls are usually 12 mm thick, external walls 15–20 mm and ceilings 6–10 mm. See the plaster quantity guide for the full method and the cement and sand ratio guide for choosing a mix.

Before you plaster

Related guides