🧱 Free Advanced Brick Calculator

Estimate bricks, cement and sand for walls. Supports custom brick sizes, multiple walls, and cost estimation.

➕ Deductions (Doors / Windows)
inch
Default: 9 × 4 × 3.5 inch

No walls added yet. Enter dimensions and click "Add Wall".

What is an Advanced Brick Calculator?

BuildCostMate's advanced brick calculator helps you estimate bricks, cement, and sand for walls. It supports custom brick sizes, multiple walls, and cost estimation.

How to Use the Advanced Brick Calculator

  1. Select Advanced Mode for custom options.
  2. Choose your unit (Feet/Inches or Meter/mm).
  3. Adjust brick size if needed (defaults change with unit).
  4. Add walls with length, height, and thickness.
  5. Add deductions for doors/windows per wall.
  6. Set waste percentage (optional).
  7. Enter cost values (optional) for cost estimation.
  8. Click Calculate to get detailed results.

How the brick calculator works

Enter the wall length, height and thickness, choose a brick size (or type your own) and the mortar mix. The calculator subtracts the openings, divides the wall volume by the volume of one brick including its mortar joint, and adds the wastage percentage you select. The mortar is whatever volume the bricks do not fill; it is increased by the dry-volume factor (about 1.27) and split into cement and sand using your ratio. Cement is converted into 50 kg bags and sand into cubic feet or cubic metres (and Sankra, where that unit is used). The wastage you pick applies to the bricks and also to the mortar, cement and sand.

Worked example

A 20 ft × 10 ft wall, 9 inches thick, needs 150 cubic feet of wall. With a 9 × 4.5 × 3 inch brick and a ½ inch joint, one brick plus joint occupies 0.0962 cubic feet, so the wall needs about 1,559 bricks, or roughly 1,637 with 5% wastage. The mortar is about 40.4 cubic feet wet, or 51.3 cubic feet dry, which for a 1:5 mix is about 7 bags of cement and 42.7 cubic feet of sand. The full derivation is in our bricks per square foot guide.

Tips for accurate results

Frequently asked questions

How many bricks are in one square foot?

About 3.9 for a 4.5-inch wall and 7.8 for a 9-inch wall using a 9 × 4.5 × 3 inch brick and ½ inch joint.

Does wastage apply to mortar too?

Yes. In this calculator the wastage you select is applied to the bricks, mortar, cement and sand.

What mortar ratio should I choose?

1:4 to 1:6 is common for brickwork. Use the richer mix for load-bearing and external walls, as specified by your engineer.

Related guides