← All guides · Updated 14 October 2026

How Much Paint Do I Need? Calculating Paint for Walls and Ceilings

Paint is sold in litres, but you decide the job in square feet or metres. The link between the two is coverage, the area one litre covers in one coat. This guide shows how to measure paintable area correctly, choose a realistic coverage figure and allow for primer and a second coat.

Measure the paintable area

For a room, the wall area is the perimeter multiplied by the ceiling height: 2 × (length + width) × height. Subtract doors and windows, since you will not paint them with wall paint. A standard door is about 21 sq ft (2 m²) and a typical window about 12–15 sq ft (1.2–1.4 m²). Add the ceiling (length × width) if it is being painted.

Coverage per litre

Manufacturers publish coverage on the tin. As a rule of thumb, emulsion on a smooth, primed wall covers about 10–12 m² per litre (110–130 sq ft) per coat. Rough, textured or very absorbent surfaces can take much more paint, sometimes covering only 6–8 m² per litre. Primers and sealers typically cover a little less than finish coats. Always use the figure printed on the product you actually buy.

Worked example: 14 ft × 12 ft room, 10 ft high

  1. Wall area = 2 × (14 + 12) × 10 = 520 sq ft.
  2. Deduct one door (21 sq ft) and two windows (2 × 15 = 30 sq ft): 520 − 51 = 469 sq ft.
  3. Two coats: 469 × 2 = 938 sq ft.
  4. At 110 sq ft per litre: 938 ÷ 110 = 8.5 litres. Add 10% for touch-ups and uneven absorption: about 9.4 litres, so buy 10 litres.
  5. Ceiling: 14 × 12 = 168 sq ft, two coats = 336 sq ft ÷ 110 = 3.1 litres.
  6. Primer on new plaster, one coat on the walls at about 90 sq ft per litre: 469 ÷ 90 = 5.2 litres.

Things that change the quantity

Buying advice

The Paint Calculator works out the area, subtracts openings and returns litres for the number of coats you choose. For the plaster underneath, see the plaster guide.

Frequently asked questions

How many litres of paint for a 12 × 12 ft room?

With 10 ft walls and two coats of 110 sq ft per litre coverage, about 8–9 litres of wall paint, depending on doors and windows, plus around 3 litres for the ceiling.

Do I need primer on already-painted walls?

Not if the old paint is sound and similar in colour. Primer is essential on bare plaster, stains and glossy surfaces.

How accurate is a coverage figure of 110 sq ft per litre?

It is a typical value for smooth walls. Rough walls and dark colour changes reduce it, so always check the tin and add around 10% as a margin.

Related tools and guides

These guides give general estimating methods. Always follow your engineer's drawings, local codes and the instructions of the material supplier.