← All guides · Updated 14 October 2026

How Many Tiles Do I Need? A Floor and Wall Tile Calculation Guide

Tile is sold in boxes from a single production batch, so running short late in the job can mean a colour mismatch. Buying sensibly means working out the area, choosing the right wastage allowance for your layout, and rounding up to whole boxes. Here is the method step by step.

Step 1: measure the area

For a rectangular room multiply length by width. For an L-shaped room split it into rectangles and add them. For walls, multiply the length of each wall by the height you intend to tile and subtract door and window openings. Keep everything in one unit; if the tile is in millimetres, convert the room to millimetres or both to square metres.

Step 2: divide by the area of one tile

Tile area = tile length × tile width. A 600 × 600 mm tile covers 0.36 m²; a 2 × 2 ft tile covers 4 sq ft. Divide the room area by the tile area and round up. Remember that the tile size on the box is the nominal size; grout joints are part of the layout, so for wide joints include them in the tile size (tile + joint) for a more accurate count.

Step 3: add wastage

LayoutWastage to add
Straight (square) grid, regular room5–7%
Straight grid, many cuts, small room or bathroom10%
Diagonal (45°) layout12–15%
Herringbone, patterns, large format with matching veins15–20%

Wastage covers cuts around walls and fittings, breakage, and a few spare tiles kept for future repairs. It is cheaper to buy spares now than to look for the same batch in two years.

Worked example: a 12 ft × 10 ft room with 2 ft × 2 ft tiles

  1. Room area = 12 × 10 = 120 sq ft.
  2. Tile area = 2 × 2 = 4 sq ft, so 120 ÷ 4 = 30 tiles.
  3. Add 10% wastage: 30 × 1.10 = 33 tiles.
  4. If a box holds 4 tiles, buy 9 boxes (36 tiles), leaving 3 spares.

For a skirting made from cut tiles, add the perimeter (44 ft here, minus door openings) divided by the tile length.

Adhesive and grout

Tips before you buy

Our Tile Calculator performs these steps with any tile size, any room size and a wastage percentage you choose.

Frequently asked questions

How much extra tile should I order?

Five to ten percent for simple straight layouts and 12–15% for diagonal layouts is typical. Add more for patterns or tiles that are easily chipped.

How many 600 × 600 mm tiles cover 10 square metres?

Each tile covers 0.36 m², so 10 ÷ 0.36 = 27.8, rounded up to 28 tiles before wastage, or about 31 tiles with 10% wastage.

Do I include grout lines in the calculation?

For narrow joints you can ignore them. For wide joints, use tile size plus joint width for each side to get a more accurate count.

Related tools and guides

These guides give general estimating methods. Always follow your engineer's drawings, local codes and the instructions of the material supplier.