← All guides · Updated 14 October 2026

How to Draw an Accurate Floor Plan Online, Step by Step

A good plan starts with correct wall lengths and ends with drawings you can print or hand to a CAD operator. This guide walks through the BuildCostMate Floor Plan Designer, including the details that are easy to get wrong, such as where a wall length is measured.

1. Choose units and draw the walls

Start by choosing feet or metres. Use the Wall Chain tool to click the corners of a room. With Ortho on, walls snap to 0°, 90°, 180° and 270°; hold Shift to flip it for a single angled wall. Osnap snaps to wall ends, midpoints and points on a wall so joints close properly. You can fine-tune any wall in its properties panel by typing an exact length, thickness and height.

2. Understand how length is measured

Walls are joined on their centre lines. If a wall is set to 15 ft and meets 9-inch walls at both ends, the clear space between the inside faces is 14 ft 3 in, because half of each 9-inch wall (4½ in) lies inside the 15 ft. That surprises many people. In the wall properties, Length measured on lets you work in centre line, inside faces (clear length) or outside faces. If you want a room that is exactly 15 ft clear, choose inside faces and type 15.

3. Add doors and windows

Pick the Door or Window tool and click on a wall. In the properties you can change width and height, flip the hinge side and swing direction of a door, and set a window's sill height (how far above the floor it starts). The 3D view shows the frame, door leaf and glass.

4. Stairs

Choose straight, L-shaped or U-shaped stairs and enter total rise, riser height and tread depth. The turn is a flat landing by default; enter a number in Steps in the turn to use triangular winders instead. Stairs have rotation and elevation fields, and a tread finish for the 3D view. The space under the stairs is left open, with a sloping 4-inch slab.

5. Slabs, elevation and finishes

The Slab tool draws a floor or roof slab by clicking its corners. Give it a thickness and the elevation of its top. When a slab is at the level where a staircase arrives, an opening for the last 12 steps (adjustable) is cut automatically, in both the plan and the 3D view. Walls, stairs and furniture each have an elevation above the ground, and walls, furniture and slabs have colour and texture options for a realistic 3D model.

6. Furniture, vehicles and dimensions

Place furniture, vehicles, trees and gates from the side panel, then rotate by an exact angle, move by a typed distance, copy in place and Ctrl+click to select several items. The Dimension tool adds measurement lines that update with the plan.

7. 3D view and exports

The 3D view lets you rotate (drag), move (right-drag, Shift-drag or the Move view button) and zoom (scroll). When the plan is ready, use Print area to print or save a selected region as PDF, or Export DXF to open the drawing in AutoCAD or any CAD program, where it can be saved as DWG.

Frequently asked questions

Can I export to AutoCAD?

Yes, as a DXF file, which AutoCAD and other CAD programs open directly. You can save it as DWG from there.

Why is my room shorter than the length I typed?

Because walls are joined on their centre lines. Change "Length measured on" to inside faces to type the clear length instead.

Is the plan saved?

Plans are saved automatically in your browser. Use Export to keep a copy of the file.

Related tools and guides

These guides give general estimating methods. Always follow your engineer's drawings, local codes and the instructions of the material supplier.