← All guides · Updated 14 October 2026

Steel Bar Weight Formula: Weight of Rebar in kg per Metre

Reinforcement steel is bought by weight but cut and placed by length, so you constantly convert between the two. The good news is that a single short formula does it for every plain or deformed round bar. This guide explains where it comes from, gives a ready chart, and shows how to apply it to a beam.

The formula

For a round bar of diameter D in millimetres:

Weight (kg per metre) = D² ÷ 162

It comes from simple geometry. The cross-section of a bar is π/4 × D² square millimetres. Steel weighs about 7,850 kg per cubic metre, so one metre of bar weighs 0.7854 × D² × 10⁻⁶ × 7,850 = 0.006165 × D² kilograms. And 1 ÷ 0.006165 is about 162.2, which is why the formula is written as D² divided by 162.

Weight chart for common bar sizes

Diameterkg per metrekg per 12 m barMetres per tonne
8 mm0.3954.72,531
10 mm0.6177.41,621
12 mm0.88910.71,125
16 mm1.58019.0633
20 mm2.46929.6405
25 mm3.85846.3259

Actual bars vary slightly with the manufacturer's tolerance, so always check the mill certificate on large orders.

Worked example: main bars of a 15 ft beam

  1. Length of one bar: 15 ft = 4.572 m. Add laps or anchorage as the drawings require; assume 4.572 m here.
  2. Four 16 mm bars: 4 × 4.572 = 18.29 m.
  3. Weight = 18.29 × 1.58 = 28.9 kg.

For stirrups, work out the number first (beam length ÷ spacing + 1), then the length of one stirrup (the perimeter of the cage inside the cover plus the hook allowance in your detailing standard), then multiply by the kg-per-metre of the stirrup diameter.

Cutting length versus weight

Remember that the weight you pay for includes every bend and hook, so use the cutting length (the straightened length of the bar), not the length of the finished shape. Overlap (lap) lengths and anchorage into columns also add steel. Typical lap lengths are expressed as a multiple of the bar diameter and depend on the concrete grade and steel grade, so take them from the structural drawings.

Estimating wastage

Use the calculator

The Steel Weight Calculator converts any diameter and length into kilograms and tonnes. Pair it with the Concrete Calculator and the concrete mix guide to cost a whole slab or beam.

Frequently asked questions

Why is the formula divided by 162?

Because steel density (7,850 kg/m³) combined with the area of a circle simplifies to D² ÷ 162.2 for a bar diameter D in millimetres.

Does the formula work for ribbed (deformed) bars?

Yes. The nominal diameter is used; the ribs change the weight only slightly and the nominal weight is the standard for ordering.

How many 12 mm bars are in one tonne?

About 1,125 metres, which is roughly 94 bars of 12 m.

Related tools and guides

These guides give general estimating methods. Always follow your engineer's drawings, local codes and the instructions of the material supplier.