Reinforcement steel is bought by weight but cut and placed by length, so you constantly convert between the two. The good news is that a single short formula does it for every plain or deformed round bar. This guide explains where it comes from, gives a ready chart, and shows how to apply it to a beam.
For a round bar of diameter D in millimetres:
Weight (kg per metre) = D² ÷ 162
It comes from simple geometry. The cross-section of a bar is π/4 × D² square millimetres. Steel weighs about 7,850 kg per cubic metre, so one metre of bar weighs 0.7854 × D² × 10⁻⁶ × 7,850 = 0.006165 × D² kilograms. And 1 ÷ 0.006165 is about 162.2, which is why the formula is written as D² divided by 162.
| Diameter | kg per metre | kg per 12 m bar | Metres per tonne |
|---|---|---|---|
| 8 mm | 0.395 | 4.7 | 2,531 |
| 10 mm | 0.617 | 7.4 | 1,621 |
| 12 mm | 0.889 | 10.7 | 1,125 |
| 16 mm | 1.580 | 19.0 | 633 |
| 20 mm | 2.469 | 29.6 | 405 |
| 25 mm | 3.858 | 46.3 | 259 |
Actual bars vary slightly with the manufacturer's tolerance, so always check the mill certificate on large orders.
For stirrups, work out the number first (beam length ÷ spacing + 1), then the length of one stirrup (the perimeter of the cage inside the cover plus the hook allowance in your detailing standard), then multiply by the kg-per-metre of the stirrup diameter.
Remember that the weight you pay for includes every bend and hook, so use the cutting length (the straightened length of the bar), not the length of the finished shape. Overlap (lap) lengths and anchorage into columns also add steel. Typical lap lengths are expressed as a multiple of the bar diameter and depend on the concrete grade and steel grade, so take them from the structural drawings.
The Steel Weight Calculator converts any diameter and length into kilograms and tonnes. Pair it with the Concrete Calculator and the concrete mix guide to cost a whole slab or beam.
Why is the formula divided by 162?
Because steel density (7,850 kg/m³) combined with the area of a circle simplifies to D² ÷ 162.2 for a bar diameter D in millimetres.
Does the formula work for ribbed (deformed) bars?
Yes. The nominal diameter is used; the ribs change the weight only slightly and the nominal weight is the standard for ordering.
How many 12 mm bars are in one tonne?
About 1,125 metres, which is roughly 94 bars of 12 m.