Choosing between clay bricks and concrete blocks is rarely a matter of unit price alone. A block is much bigger than a brick, so you need far fewer of them, and each block takes less mortar per square foot of wall. This guide shows how to compare the two on a like-for-like basis.
| Clay brick | Hollow concrete block | |
|---|---|---|
| Common size | 9 ร 4.5 ร 3 in (230 ร 110 ร 70 mm) | 16 ร 8 ร 8 in (400 ร 200 ร 200 mm) |
| Wall thickness | 4.5 in (half brick) or 9 in (one brick) | 4, 6 or 8 in depending on block |
| Units per sq ft of wall face | 3.9 (4.5 in wall), 7.8 (9 in wall) | About 1.05 |
| Units per 100 sq ft | 390 or 780 | About 105 |
| Typical weight per unit | 2.5โ3.5 kg | 12โ20 kg (hollow) |
Unit counts use a ยฝ inch joint for bricks and a โ inch joint for blocks. The wall thickness matters: a 9-inch brick wall is not comparable with a 4-inch block wall, so compare walls of the thickness your design needs.
Because blocks are bigger there are fewer joints per square foot, so a block wall uses less mortar and goes up faster; a mason can lay many more square feet per day. Bricks need more labour and mortar but are handled with one hand and suit small, detailed or curved work. Both need properly filled joints and level courses to reach their rated strength.
Blocks are usually faster and use less mortar; bricks offer familiarity, thermal mass and flexibility. The cheaper option depends on local prices, labour rates and the design, which is why a quick calculation with your own numbers beats any rule of thumb.
How many blocks are in 100 square feet of wall?
About 105 for a 16 ร 8 inch block laid with a โ inch joint.
Is a block wall cheaper than a brick wall?
Often, because of faster laying and less mortar, but it depends on local material and labour costs. Compare cost per square foot of finished wall.
Can I mix bricks and blocks in the same wall?
It is done (for example blocks inside, bricks outside), but differing movement and moisture behaviour must be handled by the design.